| Substance | ACETYL BROMIDE | |
| UN Number | 1716 | |
| HIN (= Hazard Identification Number) | 80 | |
| ADR Label | 8 | |
| ADR Class | 8 | |
| Classification Code | C3 | |
| Packing group | II | |
| ERIC | 8-42 | |
CORROSIVE SUBSTANCE
1. Characteristics
- Corrosive, causing damage to skin, eyes and air passages.
- Violent reaction with water giving off dangerous gases.
- Flash point above 60°C OR not flammable.
2. Hazards
- Heating of container(s) will cause pressure rise with risk of bursting and subsequent explosion.
- Gives off corrosive and irritant fumes, also when burning.
- May attack metals and produce hydrogen gas which may form explosive mixture with air.
- The vapour may be invisible and is heavier than air. It spreads along the ground and may enter sewers and basements.
3. Personal Protection
- Chemical protection suit.
- Self contained breathing apparatus.
- Gas tight suit in close proximity to substance or vapour.
4. Intervention Actions
4.1 General
- Keep cargo dry. Avoid contact with water.
- Keep upwind. Put on protective equipment before entering danger area.
- Minimise number of personnel in risk area.
4.2 Spillage
- Stop leaks if possible.
- Contain spillage by any means available.
- Absorb liquid in dry sand or any other suitable dry material.
- If substance has entered a water course or sewer, inform the responsible authority.
- Ventilate sewers and basements where there is no risk to personnel or public.
4.3 Fire (involving the substance)
- Extinguish with dry agent.
- Do not use water or foam to extinguish.
- Remove undamaged containers away from heat radiation.
- Use water spray to knock down fire fumes if possible.
5. First Aid
- If substance has got into eyes, wash out with water for at least 15 minutes and seek immediate medical attention.
- Remove contaminated clothing immediately and drench affected skin with plenty of water.
- Persons who have been in contact with the substance or have inhaled fumes should get immediate medical attention. Pass on all available product information.
- Mouth to mouth resuscitation should be avoided. Use alternative methods, preferably with oxygen or compressed air driven apparatus.
6. Essential Precautions For Product Recovery
- Do not use standard recovery equipment. Seek specialist advice immediately.
7. Precautions After Intervention
7.1 Undressing
- Drench contaminated suit and breathing apparatus with water before removing facemask and suit.
- Use chemical protection suit and self contained breathing apparatus while undressing contaminated co-workers or handling contaminated equipment.
- Contain decontamination run off.
7.2 Equipment Clean Up
- Drench with water before transporting from incident.
http://www.cefic.org - Telephone +32 (0)2 436 9300 |