Substance   SULPHURIC ACID with more than 51% acid
UN Number   1830
HIN (= Hazard Identification Number)   80
ADR Label   8
ADR Class   8
Classification Code   C1
Packing group   II
ERIC   8-01
 
Emergency Response Information
CORROSIVE SUBSTANCE

1. Characteristics
  • Corrosive, causing damage to skin, eyes and air passages.
  • Violent reaction with water, subdued by copious application.
  • Flash point above 60°C OR not flammable.

2. Hazards
  • Heating of container(s) will cause pressure rise with risk of bursting and subsequent explosion.
  • Gives off corrosive and irritant fumes, also when burning.
  • May attack metals and produce hydrogen gas which may form explosive mixture with air.
  • The vapour may be invisible and is heavier than air. It spreads along the ground and may enter sewers and basements.

3. Personal Protection
  • Chemical protection suit.
  • Self contained breathing apparatus.
  • Gas tight suit in close proximity to substance or vapour.

4. Intervention Actions
  4.1 General
  • Keep upwind. Put on protective equipment before entering danger area.
  • Minimise number of personnel in risk area.

  4.2 Spillage
  • Stop leaks if possible.
  • Dilute spillage with water spray as far as necessary to reduce hazard. Contain run off by any means available.
  • If substance has entered a water course or sewer, inform the responsible authority.
  • Ventilate sewers and basements where there is no risk to personnel or public.

  4.3 Fire (involving the substance)
  • Keep container(s) cool with water.
  • Extinguish with water fog (spray).
  • Do not use water jet to extinguish.
  • Use water spray to knock down fire fumes if possible.
  • Avoid unnecessary run-off of extinguishing media which may cause pollution.

5. First Aid
  • If substance has got into eyes, wash out with water for at least 15 minutes and seek immediate medical attention.
  • Remove contaminated clothing immediately and drench affected skin with plenty of water.
  • Persons who have been in contact with the substance or have inhaled fumes should get immediate medical attention. Pass on all available product information.
  • Mouth to mouth resuscitation should be avoided. Use alternative methods, preferably with oxygen or compressed air driven apparatus.

6. Essential Precautions For Product Recovery
  • Use acid resistant equipment.
  • Recover spilled product in vented container fitted with absorption filter.

7. Precautions After Intervention
  7.1 Undressing
  • Drench contaminated suit and breathing apparatus with water before removing facemask and suit.
  • Use chemical protection suit and self contained breathing apparatus while undressing contaminated co-workers or handling contaminated equipment.

  7.2 Equipment Clean Up
  • Drench with water before transporting from incident.
Top


© European Chemical Industry Council (CEFIC) 2015-.
http://www.cefic.org - Telephone +32 (0)2 436 9300