Emergency Response Information
HIGHLY FLAMMABLE LIQUID
1. Characteristics
- Gives off dangerous fumes.
- Hazardous to eyes and air passages.
- Immiscible or partly miscible with water (less than 10%), lighter than water.
2. Hazards
- Heating of container(s) will cause pressure rise with risk of bursting and subsequent explosion.
- May form explosive mixture with air.
- Gives off toxic and irritant fumes when heated or burning.
- The vapour may be invisible and is heavier than air. It spreads along the ground and may enter sewers and basements.
- May be narcotic and cause unconsciousness.
3. Personal Protection
- Self contained breathing apparatus.
- Chemical protection suit if risk of personal contact.
- Consider wearing standard fire fighting clothing underneath the suit.
4. Intervention Actions
4.1 General
- No smoking, eliminate ignition sources.
- PUBLIC SAFETY HAZARD - Warn people nearby to stay indoors with doors and windows closed. Stop any ventilation. Consider evacuation of people in immediate danger.
- Minimise number of personnel in risk area.
4.2 Spillage
- Contain spillage by any means available.
- Use low sparking hand tools and intrinsically safe equipment.
- Absorb liquid in sand or earth or any other suitable material, or cover with foam.
- If substance has entered a water course or sewer, inform the responsible authority.
- Ventilate sewers and basements where there is no risk to personnel or public.
4.3 Fire (involving the substance)
- Keep container(s) cool with water.
- Extinguish with foam - dry powder, subsequently secure with foam blanket.
- Do not use water jet or fog (spray) to extinguish.
- Use water spray to knock down fire fumes if possible.
- Avoid unnecessary run-off of extinguishing media which may cause pollution.
5. First Aid
- If substance has got into eyes, wash out with water for at least 15 minutes and seek immediate medical attention.
- Persons who have been in contact with the substance or have inhaled fumes should get immediate medical attention. Pass on all available product information.
- In case of burns, immediately cool affected skin for as long as possible with cold water. Do not remove clothing adhering to skin.
- Remove contaminated clothing immediately and wash affected skin with soap and plenty of water.
6. Essential Precautions For Product Recovery
- Ensure proper earthing of pumping equipment.
- Use flame proof pump(s). If electrically driven, minimum class T3.
- Use mineral oil resistant equipment.
- Recover spilled product in vented container fitted with absorption filter.
7. Precautions After Intervention
7.1 Undressing
- Drench contaminated suit and breathing apparatus with water/detergent before removing facemask and suit.
- Use chemical protection suit and self contained breathing apparatus while undressing contaminated co-workers or handling contaminated equipment.
- Contain decontamination run off.
7.2 Equipment Clean Up
- Drench with water/detergent before transporting from incident.
|